BXLTT - AV25B DINITROL

  • MSDS: BXLTT
  • Manufacturer: DINOL INTL INC
  • Product Name: AV25B DINITROL
  • National Stock Number: 6850-00F040530
Product Identification

Product ID:AV25B DINITROL
MSDS Date:03/12/1990
FSC:6850
NIIN:00F040530
MSDS Number: BXLTT

Responsible Party
DINOL INTL INC
20600 EUREKA RD STE 414
TAYLOR, MI 48180-5306
US

Emergency Phone: 313-374-0766

Info Phone: 313-374-0766

Preparer: LENA ALMESTRAND

Cage: GO256

Contractor
DINOL U.S., INC.
REDMOND, WA 98052 US

Telephone: 425-556-5114/800-331-4304

Cage: 0L040

Ingredients

CALCIUM SULFONATE *95-2*

CAS: 68783-96-0

Fraction By Weight: 1-5%


ISOPARAFFINIC HYDROCARBONS (NAPHTHA PETROLEUM),

CAS: 64742-48-9

Fraction By Weight: 50-60%

ACGIH TLV: 50 PPM


2-BUTOXYETHANOL (ETHYLENE GLYCOL MONOBUTYL ETHER), BUTYL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: <10%

OSHA PEL 50 PPM (SKIN)

ACGIH TLV: 25 PPM (SKIN)


POLYETHYLENE, POLYETHYLENE RESIN (HOMOPOLYMER); POLYWAX

CAS: 9002-88-4

RTECS: TQ3325000

Fraction By Weight: 20-35%


POLYBUTENE

CAS: 9003-29-6

RTECS: EM9032000

Fraction By Weight: 20-35%


LANOLIN

CAS: 8006-54-0

RTECS: OE3201000

Fraction By Weight: 1-5%


1,3-PENTANEDIOL, 2,2,4-TRIMETHYL-, DIISOBUTYRATE (ESTER)

CAS: 6846-50-0

RTECS: SA1420000

Fraction By Weight: 1-5%

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SMARTING PAIN. INGESTION: RISK
FOR PNEUMONIA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:HEADACHE, DIZZINESS, TIREDNESS, NAUSEA,
REDDENING, ECZEMA, PAIN, VOMITING, DIARRHEA.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR & REST. SKIN: WASH W/SOAP &
WATER. EYES: RINSE W/WATER. INGESTION: AVOID VOMITING. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:116F
Lower Limits:0.5
Upper Limits:7
Extinguishing Media:DRY POWDER, CO2, FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:MAY FORM EXPLOSIVE MIXTURES W/AIR WHEN
HEATED.

Accidental Release

Spill Release Procedures:USE SAND/OTHER ABSORBING MATERIAL. AVOID
GETTING INTO THE SEWAGE.

Handling

Handling and Storage Precautions:NO SPECIAL PROCEDURES.

Exposure Controls

Respiratory Protection:IF GOOD VENTILATION CANNOT BE PROVIDED, USE
BREATHING MASK FILTER A/ST.
Ventilation:MECHANICAL (GENERAL) IS RECOMMENDED.
Protective Gloves:RECOMMENDED
Eye Protection:GLASSES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:338-428F
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:820
Evaporation Rate & Reference:(BU AC = 1): <0.6
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW/WHITE LOW VISCOUS THIXOTROPIC FLUID W/SLIGHT
SMELL
Percent Volatiles by Volume:68%

Stability

Stability Indicator/Materials to Avoid:YES
STRONGLY OXIDIZING SUBSTANCES.
Stability Condition to Avoid:LOW & TOO HIGH TEMPS.
Hazardous Decomposition Products:NONE BY NORMAL USE.

Disposal

Waste Disposal Methods:BURNING UNDER CONTROLLED CONDITIONS. DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS. UN NO 1139.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.